[Netease smart news August 7 news] As we all know, Jia Yueting has a very firm dream of building a car, after resigning as chairman of LeTV, has been in the United States to participate in its investment car company Faraday future car repair plan.
It is understood that Faraday Future (Faraday Future, referred to as FF) only known investors, LeTV founder Jia Yueting has been appointed as the company's global executive committee chairman, in addition, they also hired the former head of BMW electric vehicle business Ulrich Ulrich Kranz served as chief technology officer.
Citing "Wall Street Journal" report, they announced last month that they had given up $14 million in "relief loans" after they had given up $1 billion to build a factory in Nevada. This was enough to pay part of the rent for the new plant, borrowing money from a New York city. Investment company, the collateral is Los Angeles headquarters.
It is reported that Faraday's new factory in the future is a 55-year-old factory in Hanford, California, with an area of ​​90,000 square meters. Since 2001, the plant has been basically empty, and this property is currently Known as Hanford Business Park, located approximately 200 miles north of Faraday's future headquarters in Los Angeles, it belongs to the United States real estate development and investment company, Industrial Realty Group, and a representative of Faraday Future confirmed that the lease agreement was in early 2018 After the entry into force, the company will relocate to Hanford Business Park. (Dingxi)
Pay attention to NetEase smart public number (smartman163), get the latest report of artificial intelligence industry.
Waterproof Vertical Mount D-Sub Connectors
waterproof D-sub system is IP67 rated. These panel-mount connectors are available in solder cup as well as right angle and vertical PCB mount types. The cable-mount connector kit includes the connector, which has solder cup contacts. These connectors are available in 9-, 15-, and 25-positions in standard density and 15-, 26-, and 44-positions in high density. The recommended wire gauge for the solder cup connector is 22 AWG to 26 AWG.
These panel-mount waterproof D-subs are designed for rear-mount applications in panels that are up to 2.0 mm thick. They come with two sets of jackscrews. One jackscrew set is 5 mm long for panel thickness up to 1.2 mm, and the other is 6 mm long for panel thicknesses from 1.2 mm to 2.0 mm.
Cable mount D-sub connector kits come with the backshell, seal, thumbscrews, and solder cup connector. They are also easy to install. Simply fit the cable through the backshell, terminate the wire to the solder cup contacts, and hand tighten the cable nut on the rear of the backshell. The backshell will seal a particular range of cable diameters depending on the position count of the connector. Consult the datasheet for specific cable diameter ranges.
Specifications
Current rating
Standard D-sub: 5 A
Hi-density D-sub: 2 A
Breakdown voltage: ≥ AC 500 V/1 minute
Insulation resistance: ≥ 500 MΩ @ DC 500 V
Contact resistance: ≤ 20 mΩ
Material
Contacts: copper alloy, gold-plated
Connector body: nylon 9T or PBT, UL Recognized
Shell: steel, nickel-plated
Applications
DV camcorder
DV VTR
Non-linear editing system
Broadcast monitor
Betacam deck
Panel Mount Waterproof D-Sub Connectors:
Water Proof D-Sub, Standard Density, Male, Panel Mount
Water Proof D-Sub, Standard Density, Female, Panel Mount
Water Proof D-Sub, Standard Density, Female, PCB Mount
Waterproof solder cup, stamped & formed contact D-sub waterproof
solder cup,machined contacts D-sub waterproof
Vertical Mount Waterproof D-Sub Connectors:
Combo Power + Signal D-Sub Connector, Vertical Mount, Pluge Type,
right angle D-sub waterproof
IP67 rated Combo power D-sub waterproof
Standard Density, Waterproof Vertical Mount D-Sub Connectors, High Density Waterproof Vertical Mount D-Sub Connectors,IP67 D-Sub Connectors Vertical Mount,Board Mount Waterproof Vertical Mount D-Sub Connectors
ShenZhen Antenk Electronics Co,Ltd , https://www.antenksocket.com