High-efficiency grading flash dryer profile - Huaqiang Electronic Network

Single chip microcomputer STM32L151CCU6

0805RGB flashing

Probe high frequency needle 10445 with line high frequency needle with 1 high frequency core can pass 3A

In order to effectively improve drying efficiency and save energy, the traditional flash dryer has been further improved. By drying tests on various materials, a high-efficiency split-flash drying machine is designed and produced to achieve drying efficiency and dry quality. Significantly improved.

The high-efficiency grading flash dryer consists of an air heating system, a pulverizing system, a feeding system, a host drying grading system, a control system, and a fan. During operation, the material enters the drying chamber through the screw feeder, and meets the hot air rotating at high speed in the drying chamber. The fine powder material is moved by the hot air to the upper end of the drying chamber, and the material that cannot be taken falls to the bottom of the drying chamber, and is bottomed. The comminution device was broken and the material was quickly dispersed. Under the action of centrifugal force, the product which reaches the degree of drying and a certain degree of fineness is blown out of the classifying device, and the material is dried in the process.

Features:
1,

The jacketed water cooling device is used in the high temperature zone to keep the inner wall temperature within a certain range to avoid material coking.

2,

The grading control device is installed, the fineness of the product can be adjusted, and the product granularity and dry quality can be effectively controlled, and the product does not need to be pulverized.

3,

The unique stepless speed regulation pulverizing device makes the material dispersion efficiency higher, accelerates the drying speed, and realizes the large equipment production.