1. What is a controllable energy-saving lamp holder?
The controllable energy-saving lamp holder that has obtained the national utility model patent can be installed with energy-saving lamps and LED light sources. It can use sound and light technology, radio microwave technology, door magnet technology, laser infrared light technology to control the power supply of the lamp holder. On and off. Photosensitive devices are used to block the power supply path of the lamp holder during the day to disable any control. When people go up and down the corridor at night, they can turn on the power supply path of the lamp holder to provide illumination. Compared with the traditional sound and light control switch sold in the market, it has more obvious energy-saving effect, more convenient use, more reliable performance, simpler installation and more beautiful appearance.
Second, the technological advancement of the controllable energy-saving lamp holder:
1, the first can use energy-saving lamps, LED lights on the sound and light control switch: At present, the common use of corridor lighting in China is the incandescent lamp with sound and light control switch or push button switch. This switch eliminates the long light and is a major advancement in energy saving technology. However, it has several defects that have not been overcome: 1. Incandescent lamps are extremely low-efficiency light sources with short life spans and severe heat generation. They are facing elimination, but they cannot be replaced with energy-saving light sources because of the sound and light control switchboard. 2. The sound and light control switch is easily exposed to the external sound during the night, and it must be received by the sound to turn on the power supply. The working conditions are contradictory. 3. In the case of quiet nighttime, in order to activate the corridor lights, people must cripple or clap their hands when entering the corridor. These noises disturb the rest of the residents and are very annoying. 4, the button is not hygienic, easy to spread germs. Due to the successful development of the controllable energy-saving lamp holder, incandescent lamps can be completely abandoned in life.
2, the first innovative control method: In addition to the use of sound and light control technology, the first use of radio microwave remote control technology and door control technology to control the corridor energy-saving light source on and off, it also overcome the defects of sound and light control switch and button switch. Also pioneered the use of laser infrared light control technology. Make the lights better for humans, and you can command the lights as you like. These technologies are fully mature and are the result of years of results. They have been tested in practical use and samples can be tested.
3, the first new style of the appearance of the corridor lights: All the way, the lampholders of the corridor lights are a dull round face, many high-end communities have to add a lampshade on the lamp to make it look better, but this increases the cost It also reduces the light efficiency of the lamp. Now the new lamp holder adopts a new design concept, and the lamp holder is designed with a streamlined elliptical shape or other special shape, such as the shape of the bird's nest, and its appearance has a metallic texture, which makes it more based on the addition of practical functions. Ornamental and artistic. The lamp holder is suitable for installation in the corridors of various grades of communities, and can also be installed in homes, hotels, office areas and other occasions. At the same time, special measures are taken on the terminals to give them the highest level of safety protection. The appearance of the lamp holder has been applied for national patents and is legally protected.
Third, the market prospects:
1. Market supply and demand analysis: Incandescent lamps are banned from production and sales are prohibited. All corridor lights and their associated control switch panels need to be upgraded. Whether the corridor lamp is an energy-saving lamp or an LED lamp, the lamp holder and the control panel are required. Statistics show that the lighting of staircases in China is at least 150 million. Now the awareness of energy conservation is deeply rooted in people's minds. With the continuous increase in the price of electricity, everyone is really eager to use energy-saving light sources. Now the cost of LED lighting is still too high, and the technical indicators need to be improved. However, energy-saving lamps are very mature. The shape of compact energy-saving lamps is very beautiful, and the price is also constantly cheap. At the same time, LED lighting has gradually stepped into the field of home lighting, and now solves the problem of being able to use energy-saving lamps and LED lamps. The demand will appear like a blowout. A variety of control methods are available for users to choose from. The switch panel is also available to the market. It can directly replace the switch board that has been installed. This new type of controllable lamp holder is suitable for installation and use of all light sources, and there is no need to worry about the elimination of such a controllable lamp holder.
2, application field analysis: can be used indoors, office areas, hotels. In home lighting, energy conservation is still an eternal topic. We are sure to welcome households with energy-efficient, easy-to-use and safe lighting products. It is really stupid that many people still use energy-consuming incandescent lamps at home. For the elderly and children who are inconvenient to move, and the special people in high-end places, the advantage of using the remote control method is that it can switch any of the lamps in the room anywhere in the room, and it is absolutely safe to not touch the high voltage.