1000/5A China High Accuracy Split Core Current Transformer Clamp

  • Model NO.: P50
  • Type: Current Transformer
  • Operation Condition: Instruments
  • Winding Form: Single Layer & Tightly Wound Type
  • Installation: Active Type
  • Types: Current Transformer Clamp
  • Color: Gray or Blue
  • Output Signal: 0-5A or 0-5V
  • Diameter: 50mm
  • Size: 102.9mm X 219.6mm X 28mm
  • Trademark: GFUVE
  • Specification: P50, 0.1%
  • Application: Electronic, Instrument, Position Sensor, Audio, Lighting
  • Phase: Single
  • Usage: Measurement
  • Insulating Medium: Common Insulating Materials
  • Magnetic Circuit Structure: Combined Type
  • Ratio: 1000:1, 1000:5, 500:5
  • Current Range: 0-1200A
  • Output Cable: 2.5m
  • Weight: 550g
  • Class: 0.1
  • Transport Package: Standard Export Box
  • Origin: Beijing
P50 1000/5A China manufacturer high accuracy AC current transformer clamp
1000/5A China High Accuracy Split Core Current Transformer Clamp
1000/5A China High Accuracy Split Core Current Transformer Clamp

1000/5A China High Accuracy Split Core Current Transformer Clamp
The round jaw design on the P50 Series AC current transformer clamp along with the high content nickel metal core makes them well suited for power quality applications where high accuracy and low phase shift along with wide frequency are important. Measurement range is 1mA to 1200A.
The P50 current transformer clamp is a general purpose 1000A AC current probe designed for use with DMMs, loggers and other instruments that have a current input. It has a 1000:1 ratio and output of 1mA per amp or 1mV per amp measured in the jaw. The P50 has an integral 2.5m lead terminated. The rounded jaw design on this probe makes it well-suited for power applications where high accuracy 0.1% and low phase shift and wide frequency response are important.
APPLICATIONS
Power quality measuring
Large industrial loads
Measuring around cable bundles
Power load monitoring
Waveform analysis
Energy meter calibrator
FEATURES
Measurement range of 1mA to 1200A AC
Large jaw opening accommodates conductors up to two 500kcmil
Improved ergonomic design and easy operation
High content nickel metal core
Conforms to EN 61010, 600V CAT III
Low phase shift for power measurement
Designed for DMMs, recorders, loggers, oscilloscopes, power and harmonic meters
UL, CE mark
PARAMETERS

Electrical parameters
Ratio 1000: 1 or 2000:1 (customized)
Accuracy class 0.1%, 0.2%, 0.5%
Primary current 0 - 1000A AC
Secondary current 1mV/A AC, 5mV/A or (customized)
Max. Cont. Input current 1200A
Over voltage category CAT III 600V
Output signal (AC current) 333mV, 500mV,1V,2V,5V AC at nominal input current
AC Accuracy(1000A Range)
0-10A ≤0.5%
10-100 ≤0.2%
10-1200A ≤0.1%
AC Phase Shift(1000A Range)
0-10A ≤0.5°
10-100 ≤0.2°
10-1200A ≤0.1°
Frequency range 40Hz-2000Hz
Dielectric strength 3KV 50Hz/60Hz at 1 minute
Temperature range -20°C to +55°C
Output 2.5 meter cable with D01 connector
Max. voltage not insulated conductors 600 V
Standard EN 61010-1, EN 61010-2-032, IEC60044-1
Installation Clamp type
Output mode Lead output (2.5m)
Mechanical parameters
Dimensions (L x W x H)(mm) 102.9 x 219.6 x 28
Weight (g) 550
Holding wire diameter (mm) φ50
Max. jaw opening (mm) 50
Color Gray or blue
Material PC+ABS+Polycarbonate, UL94 V0

Single-Sided Pcb

Single-Sided Pcb,Single Sided Pcb,Single Sided Pcb Manufacturing Process,Single Sided Pcb Board

PCB Assembly Co., Lt d , http://www.nbmultilayerpcb.com