LEDs are characteristic-sensitive semiconductor devices with negative temperature characteristics, so they need to be stably operated and protected during application, thus creating the concept of driving. LED devices have almost strict requirements for driving power. Unlike ordinary incandescent bulbs, LEDs can be directly connected to 220V AC mains. The LED is driven by a low voltage of about 3 volts. It is necessary to design a complicated conversion circuit. LED lamps for different purposes must be equipped with different power adapters. In the international market, foreign customers have very high requirements for efficiency conversion, effective power, constant current accuracy, power supply life and electromagnetic compatibility of LED drive power . To design a good power supply, these factors must be considered comprehensively because the power supply is in the entire luminaire. The role is just as important as the human heart.
Due to the limitation of LED power level, it is usually necessary to drive multiple LEDs at the same time to meet the brightness requirement. Therefore, a special driving circuit is needed to illuminate the LED. Here are a few of the current mainstream LED driver methods:
1, RC volume
The input current is limited by the impedance of the capacitor under AC to obtain a DC level to power the LED. The driving method is simple in structure and low in cost, but the input non-isolation scheme has security risks. Moreover, the conversion efficiency is very low and constant current control cannot be achieved.
2, isolation flyback circuit
The flyback circuit is used to generate a DC level on the secondary side through the transformer, and then the ripple of this level is fed back to the primary side through the optocoupler to be self-oscillated. Such circuits comply with safety certification requirements, and the output constant current accuracy is better, and the conversion efficiency is higher. However, due to the need for optocoupler and secondary constant current control circuits, the system is complicated, bulky, and costly. It has gradually been replaced by the original side plan.
3, the original side program
The primary side scheme is to control the output power and current completely at the primary side of the AC. The most accurate can achieve 5% constant current accuracy, and the secondary side only needs a simple output circuit. The primary side mainly relies on the feedback of the auxiliary side to control the output voltage, and relies on the current limiting resistor to control the primary current, and multiplies the turns ratio to control the accuracy of the output current. The primary side scheme inherits the advantages of the isolated flyback circuit, and at the same time, the architecture is simple, can be small in size and low in cost, and has become a mainstream driver.
The problem of constant current accuracy of the primary side: Since the production accuracy of the transformer is difficult to control, the output current drifts greatly when the primary side scheme uses a low-quality transformer. Therefore, the primary side scheme has improved the secondary side constant current control circuit through improvement, which is more complicated than the ordinary primary side scheme. However, compared with the flyback scheme, the optocoupler can be omitted, and the system has the highest cost performance.
According to the power consumption rules of the power grid and the characteristics of the LED drive power supply, the following points should be considered when selecting and designing the LED drive power supply:
Breze stiik mega changed the game of the Disposable Vape industry, it features with the function of bottom airflow adjustable, which will make it possible that vaper can enjoy the different vaping experience, especially the airflow.
It got a bigger and wider body and bigger battery capacity, and also more liquid capacity than most of the vapes in the market, it`s one of the most popular disposable vapes in our white label line.
This Breze Stiik Mega encapsulated with a 1100mAh battery, it carries a 5% nicotine salt strength, and it produces approximately 2200 puffs per piece, holding a 7.0ml capacity high-grade pure taste nicotine salt juice.
This is a breze stiik mega, a perfect alternative of smoking a real cigarette. And it`s portable, convenient to use, because it`s not only light but also constructed in a way to make it pocket – friendly for your day-to-day travels. What`s more, the most amazing part of it is the variety of fantastic flavors choices. As a result, this pod produces pure strong, and intoxicating vapor and flavors that you will fall in love with it once you have your first puff.
Specs & Features:
Refilled Flavor: All Flavors Available
Nicotine Salt Strength: 5% / 50mg
Disposable, non-rechargeable & non-refillable
All-in-one system
Draw activated firing mechanism
Juice Capacity:7.0ml
Battery Capacity: 1100mAh
Approx 2200 puffs per device
Approximately equivalent to 150 real cigarettes per vape
Color: Same as pictures
Reference Resistance: 1.6 ohm
Product Name: Breze Stiik Mega Disposable Vape
Custom Disposable Vape Pen,Breze Stiik vape,Breze Stiik disposable
Hongkong Onice Limited , https://www.osbvapepen.com