I usually say that our boys play games are not serious. Recently, one of the conditions for recruiting a company is whether it will play online games, because people who play online games can be more united with everyone, team ability and team integration ability is very fast. . After Xiaobian heard it, it was really a joy, and found a foothold for online games. Today, I will introduce you to the selection of DIY game consoles!
How to assemble hardware for the game computer? DIY game console selection tips
The host configuration is still very important. Generally, the game console is more expensive than the normal host, so keep these points in mind when selecting the game console: heat dissipation performance, memory size, graphics card configuration, design, dustproof design, and so on .
Cooling is better
Cooling is an indispensable condition for the host to choose. The powerful graphics card and CPU will have a lot of heat dissipation problems. Now many manufacturers will make various solutions. Installing the cooling fan on the front and rear panels of the chassis can speed up the chassis. The internal air flows.
Have enough memory and be flexible
When choosing, try to choose some memory with larger capacity. Now the game DIY host memory is basically 8GB, and the new platform prefers DDR4 memory. In addition, it is better to support the number of hard drives, because some games have higher reading speed requirements, and then can not be supported by traditional hard drives.
CPU is enough
For today's CPU overperformance, many games do not have a particularly high CPU requirement, mainly because of the high requirements of the graphics card. Therefore, when the machine is installed, the CPU budget can be cheaper than the graphics card. In general mainstream games, the mainstream i3 is enough. In the medium and large, i5 and i7 are selected. In addition to enthusiasts, there is no need to choose the top flagship level.
Graphics card
Sometimes it is necessary to support high-end graphics cards. For gamers, this year's N-card and A-card platforms have launched new graphics cards, fully adding VR game support, such as GTX1080/1070/1060/1050, AMD's RX 480/470/ 460 is a good choice.
Graphics card
In addition, if the size of the chassis is not enough, the graphics card will not be installed. Therefore, when choosing the chassis, you must support the super long graphics card!
Dustproof design
If the dust enters, the hardware will be damaged, and the life will be reduced. It is necessary to ensure heat dissipation and dust prevention. The simplest is to put on the air filter. Many machines are equipped with large-size cooling fans.
Cool look
This is entirely based on personal preference, and a more cool design will make players more like it.
SSD
Although the traditional mechanical hard disk has a large capacity, the reading speed has a bottleneck, and it is prone to problems such that the speed of the switching machine is not fast enough, and the loading of large game applications is slow. The speed of the solid state drive is several times that of the mechanical hard disk, which solves the performance bottleneck of the mechanical hard disk, greatly improves the computer boot speed, large game loading speed, and reduces the occurrence of the computer jam. For the game player, the SSD is already the standard. Match.
a('show4');Therefore, when DIY is installed, don't forget the SSD. If you think that the SSD capacity is small and the storage requirements are high, you can purchase the SSD and the mechanical hard disk separately. The SSD is the system disk and the HDD is used for storage. .
Editor's note:
This way, the game console will not enter the minefield! Of course, there may be a lot of details that need attention. I didn't explain them in detail. When I choose the game console, I can know that the brands are more mainstream in the e-sports category, and then I have general ideas in the selection. Framework, this is the small focus of this article~
The main function of the Solar Energy Storage System is to store the electrical energy generated by the solar panels so that it can continue to supply electricity when the solar panels cannot generate electricity or when the demand for electricity exceeds the supply of the solar panels. It is an energy storage solution for improving the self-sufficiency and energy efficiency of solar power generation systems.
Main effect:
Energy Storage: The Solar Energy Storage System uses batteries to store excess electricity generated by solar panels. When solar panels generate more power than needed, the excess power is stored in batteries to continue supplying power when needed.
Power supply backup: When the solar panels cannot generate enough power, such as at night, in cloudy, or in bad weather, the Solar Energy Storage System can use the stored power to continue to supply power to ensure the continuity and stability of the power supply.
Energy Balance: The Solar Energy Storage System helps to balance the energy difference between the electricity generated by solar panels and the electricity demanded, thus optimizing energy management and maximizing self-sufficiency.
Differences from other energy storage systems:
Power source: The power source of the Solar Energy Storage System is a Solar Panel, which directly generates electricity by converting sunlight. While other energy storage systems may come from other renewable energy sources, such as wind energy, hydro energy, or non-renewable energy sources, such as grid electricity.
Renewability: The Solar Energy Storage System uses solar energy as a power source and is a renewable energy system. Other energy storage systems may utilize different types of energy sources, with varying degrees of renewability.
Application scenarios: Solar Energy Storage System is mainly used in photovoltaic power generation systems, especially in conjunction with solar panels. Other energy storage systems can be used in different energy generation systems, selected according to specific energy sources and application requirements.
Overall, the main function of the Solar Energy Storage System is to store the electrical energy generated by the solar panels for continued power supply at night or when the solar panels are unable to generate electricity. Compared with other energy storage systems, it uses solar energy as a power source, is a renewable energy system, and is mainly used in photovoltaic power generation systems to improve energy utilization efficiency and self-sufficiency.
solar energy storage solutions, solar battery storage solutions, storing electricity from solar panels, power storage for solar panels, 10kw solar system with battery storage
Ningbo Autrends International Trade Co., Ltd. , https://www.aitsolarpanels.com