Attached section selects part of the actual recorded video, please watch the actual display effect in ultra clear mode.
After learning about the parameters of the Xplore C1+, I feel that the volume is small (32mm, 32mm, 32mm), but I feel a little “suffocating†after I get my hands. In this small cube, a fixed-focus wide-angle lens, industrial-grade CMOS sensor, 1080p full-HD video processor, microphone and professional audio processing chip, gravity sensor G-Sensor, built-in 180mA lithium polymer battery, and built-in GPS module are integrated. Built-in Bluetooth WIFI can be described as "small but complete."
C1+ supports 1080p Full HD video, F1.8 aperture, video adjustment scene adaptation, one-touch interception of 10-second highlights, support for Bluetooth flash, support for WIFI connectivity, support for GPS location services, and GPS track recording. With the enjoyment shoot APP can quickly achieve video cutting and stitching, support for a variety of popular video filters and support sharing with mainstream social media platforms, so that play more variety. However, Xplore C1+ as a driving recorder to attract me is: built-in GPS + one-click flash, easy to record and view the trajectory, to capture the scenery or emergencies on the road.
The APP version used in the article is 2.0.4, the C1+ firmware version is 0.1.9, and the mobile phone is Samsung S5 (V5.0).
Talk about the advantages
1. Small and exquisite appearance, no excessive increase in volume with the bracket, does not affect the line of sight
2. F1.8 aperture with 200W pixels to meet the needs of recording 1080P video.
3. Easy to assemble and disassemble, easy to carry and use
4. Support one-click flash function, support WiFi direct connection, playing a variety of
5. Support GPS positioning, support track playback, support for track recording
6. APP comes with video editing capabilities to facilitate sharing
Let's talk about places where the use of comparison is concerned:
1. The bracket adopts a paste chassis design instead of sucker design, and the bracket is not easily disassembled.
2. The white body is easily stained
3. The endurance capacity is improved, and the current use of C1+ recording time is too short.
4. The snap-in design is not easy to separate the bracket from the host
5. The noise reduction effect in video should be improved
6. There are leap-second conditions that need to be improved
C1+ exquisite design features more support functions white body easy dirty paste base design is not easy to remove
The black box mainly contains one C1+ host, one dedicated stand (with charging interface), one flash button, one car power adapter, one 3.5-meter long power cord, and one hidden user manual.
Along with the package, there is also a random gift card reader and memory card (according to the actual package), which is quite practical and intimate for use.
C1+ uses a body design, no separation buttons, a volume of 323232 mm cubes, with the design of a round lens, between the radius of the display design exquisite, and the weight is only 36g. Although C1+ does not have a design screen, it can be seen from the mobile terminal through the connection with the mobile phone APP. The camera is 2 million real pixels, with 1/2.7 inch industrial image sensor and F1.8 aperture wide-angle lens, the actual effect is yet to be verified. C1+ does not use the common solutions such as Anba, Link, or Quanzhi, which are common in the market. Instead, it uses South Korea's industrial-grade sensors and quad-core DSPs. However, specific models have not been found.
The C1+ is designed with a TF card slot behind it, and there are hint icons for TF insertion direction to avoid damage caused by inserting against the memory card. The maximum support is 32G. On both sides of the edge are the working indicator and the power indicator. Below is a large-area heat-dissipation hole. After all, a small volume integrates so many originals, the heat dissipation performance must be good, to avoid the crash caused by the use of the process. The three holes on the upper left side of the heat sink are Mic, and the single hole on the upper right is the RESET reset button.
C1+ has a non-slip design on the upper, lower, left and right sides. There is a groove on the left and right sides for fixing with the bracket. C1+ is connected to the bracket in a snap-fit ​​style.
The power button is designed to be on the left side, and it takes two seconds for the power on and off for three seconds. In the video recording state, a short press will take a photo and generate a short video. The key design feels good and the feedback force is obvious.
The bottom is also designed with cooling holes to further increase the cooling area.
The top is designed with contacts for charging with the stand.
The role of the bracket is not only to connect the fixed C1+ host, but also to carry out GPS positioning and charging functions. The bracket adopts ball type rotatable locking method, which is very convenient for adjusting the angle.
The charging interface does not use the common Mini USB Type B interface, but the Micro USB interface.
The logo on the other side of the cradle tells you that the C1+ has WIFI, GPS and Bluetooth capabilities.
The place where the bracket is slightly disappointed is the chassis, because the glue used can't be easily removed after it is fixed. It is inconvenient to disassemble.
The power adapter is well-designed because two power sockets are reserved, one is 1A and the other is 2.1A. This can be used to power the C1+ while charging the phone, which is very practical and thoughtful design.
Bluetooth flash button work more sophisticated, larger than a dollar coin, there is the key. It is connected to the device at the factory and can be used directly with C1+.
If C1+ does not sound after the key is pressed and the indicator light is not flashing, it indicates that the recording could not be performed. There may be a problem with the connection. Try to enter the APP to set and reconnect the connection.
Enjoy Xplore C1+ will record the short shot of the flash 12 seconds and 12 seconds after the first 4 seconds
Easy to install
Align the contact position of C1+ with the bracket, press it directly, and the combination is strong. You do not need to worry about the problem of separation and drop, but it takes some effort to separate.
Actual installation renderings. The power cable is 3.5 meters long enough to meet the requirements of the hidden line.
Enjoy the tribal operation is simple to set the built-in features and practical functions to be perfect stability to be improved
The C1+ APP is a share of the Horde, divided into three sections, namely Horde, Equipment, and Personal Information. The sharing tribe is mainly used to view others' sharing or sharing their own pictures and videos, travel, emergencies, etc. The contents of the device page can be divided into four parts. One is the picture after the APP successfully connects to C1+, one is the picture and video in the mobile phone, the other is the picture and video on the C1+ memory card, and the last one is the function of video editing.
C1+ is connected to the mobile phone through a hotspot provided by C1+ for direct WiFi connection. The mobile phone directly plays the video stored in the TF card, eliminating the need for card-pulling operations, smooth video playback, and buffering the loading time when dragging back and forth. obvious. However, the current version of WiFi connection is not stable, and there will be problems with the connection being unsuccessful. You can try to connect from the system's WiFi connection page or reconnect directly to C1+reset.
Local pictures and local videos are resources stored in the mobile phone and can be viewed directly offline without connecting devices.
However, the "Files" page must be connected to C1+ to view, including three folders for video, events, and interests. The video page is a normal recorded video. The event is used to save the video locked in some special situations, and the interest is used to save the video recorded by the Bluetooth flash.
Bring your own picture and video processing capabilities, you can choose to use a variety of popular video filters, for love sharing friends for a lot of convenience.
There are several other major parameters in the device setup function, which are G-sensor settings. They are labeled with 1-4, and they do not indicate the level of sensitivity; the resolution can be set to 1080 or 720 can be set; the firmware upgrade is also performed here.
Some of the important settings in my information settings are offline maps. The built-in Baidu maps allow you to easily see where you've been and where you've been. While playing the video, the position of the video and the driving trajectory can be displayed synchronously. In terms of maps, I still prefer Gaudet and Kay Rucker's maps, and individuals feel more professional.
The firmware upgrade is currently available for normal download. However, the current manual upgrade function of the mobile phone APP cannot be used, and it needs to be upgraded with the TF card. Video hard acceleration acceleration is mainly for the smooth support of 1080p, keep the default open like.
The function of file service is different from what you expected.
Because the content is open inside the phone
Compared to the mobile phone, the content is the same. This feature does not have any use for personal feelings and can be removed. The first is that the content on the C1+ memory card cannot be viewed. The second is if you want to share the contents of the mobile phone with other people, you can directly share via Bluetooth or WIFI.
The version of the App Capture APP is currently V2.0.4, and the phone used is the Galaxy S5 (Android 5.0). During the process of use, there was a problem with Force Close. The stability of APP needs further improvement.
After C1+ starts recording, four files will be generated. When the acceleration sensor (G-Sensor) is triggered, the video will be automatically saved to the EVENT folder, which is the event folder of the mobile phone APP. MANUAL is a video that is recorded with the camera during manual recording. The THUMB folder is a picture taken manually during recording.
It should be noted that, the video format recorded by C1+ is AVI. Whether it is an auto-recorded driving record or a flash-recorded video, the latitude and longitude information is included in the name after successful positioning. Individuals have always felt that the AVI format video volume is relatively large and the display effect is not the same as mov or mp4 in resolution.
The video in the flash folder is also in AVI format.
From the video encoding information, C1+ uses the standard AVC H264 format, the frame rate is 30fps, and the code rate is 8102Kbps.
The local video, that is, the video format recorded on the mobile phone is MP4.
The video code is AVC avc1, the frame rate is about 28fps, less than 30fps, and the resolution is still 19201080.
For the leap-second situation of recorded video, we can confirm by recording the stopwatch. From the video recorded before and after continuous recording, it was found that the leaked seconds were more than a second. From the time of video recording, we can also intuitively see that the end time of the previous video is one second apart from the start time of the next video. The problem of missing seconds can be avoided by recording in advance.
It is worth mentioning that TF card compatibility is still relatively good, here only tried 8G (three), 16G (two) and 32GTF card (one), the major brands of manufacturers Sandisk, Kingmax, Kingston,, Samsung can recognize and use it normally, from Class6 to Class10. But in the process of continuous use, each of them selected a continuous video recording for about 2 hours. The recorded video has one or two situations that cannot be read and cannot be played, or whether there is a problem with shooting pictures or video, basically. It can be ruled out that it is a TF card. From the test of 12 hours of continuous video recording with a 16G TF card, the device did not suffer from a crash, but the body was obviously hot.
Can experience the function of the sports camera, the performance of the daytime picture quality is clearer, and the night performance ability is still acceptable.
First, simply measure the horizontal angle, use an A4 paper and a pen to fix the position of the camera, find the position of the pen on both sides of the camera, and record the distance between the two points and the vertical distance from the camera to the paper. .
The distance between the two points is approximately 25.7 cm, the vertical height is 7 cm, and the horizontal angle is approximately 122.8 degrees. The error must exist. This is just a simple test or the actual video footage.
The C1+ can be used with a mobile power supply to experience a sports camera. The actual recording time of the C1+ is also two or three minutes. The battery is not very powerful. We hope that the subsequent firmware update can extend the use time.
The color display is a bit bright, but the definition is slightly poor, and distant objects are slightly blurred.
Compare the other driving recorder Qunhua S16 video screenshot screen.
The horizontal viewing angle is larger, and the front windshield can be seen on both sides and on both sides of the front. The roadside scene distortion rate is not great.
C1+ is better at night for lighting, there is no obvious glare, but it will also cause the surrounding object light to be dark, it is not easy to see the surrounding situation. The front license plate can be clearly identified, but the license plates on both sides are not very clear.
Compared with Qunhua S16, it is more sensitive to light sources and enhances the overall brightness of the picture.
In general, in terms of gameplay, sharing the tribal APP with C1+ brings different gameplay to the driving recorder, making it easier and quicker to capture, record, and share while driving. However, the sticky charging base has greatly reduced the portability, and riding on the handlebars with a mobile power source is still good. If you can optimize the program to improve the C1+ life time, coupled with the function of the electronic dog, then in the same price of the driving recorder market will still be very competitive. But first, the stability of the APP should be improved, and the missing seconds need to be repaired.
The Brushless DC Motor consists of a motor body and a driver, and is a typical mechatronic product. The driver is composed of power electronics and integrated circuits, and its functions are: receiving start, stop, and brake signals of the motor to control start, stop, and brake of the motor; accepting position sensor signals and forward and reverse signals for controlling the inverse The power bridges of the variable bridges are turned on and off to generate continuous torque; the speed command and the speed feedback signal are accepted to control and adjust the speed; provide protection and display, etc.
Brushless motor,Brushless dc motor,Bldc motor,Brushless motor price,Brushless dc electric motor,Bldc motor price
Shenzhen Maintex Intelligent Control Co., Ltd. , https://www.maintexmotor.com