If you want to start with a truly peace of mind sweeping robot, it needs at least the following conditions:
1, route planning
Sweep robots are divided into two types: random and planned. Random cleaning is basically unplanned. I want to see where the robot feels. The sweeping results are piled up by sweeping time. The efficiency is low, but the coverage rate is high. Most of the economical sweeping robots use this kind of random sweeping.
The planned sweeping will use the navigation and positioning system to construct the environment map and customize the sweeping path. If the positioning system and route planning are properly designed, cleaning efficiency will be much higher than random cleaning.
It should be noted that some sweeping robots in the mid-to-low-end market currently use arcuate route sweeping plans. This design seems to be more standard and efficient, but it is usually not matched with an effective positioning system. The possibility of missed sweeps is large, and it may not be as efficient as random sweeping.
2, cleaning ability
Sweeping robots are usually combined with sweeping and sucking. Some robots also carry water tanks and rags, with the function of mopping the floor.
The sweeping robot with the main brush sweeping part can sweep the dust that is electrostatically adsorbed on the ground through the main brush at a high speed, and the sweeping effect is better than the robot with only the suction mouth configuration. In the selection of the main brush, V-type and wafer-style sweeper cleaners are more efficient. If your home has a long-haired carpet, the cleaning effect of the clip-on sweeper is best.
In the selection of suction, many sweeping robots currently advertise large suction. Although large suction power is strong, it may also mean that the suction port is small. Small mouthpieces are not only easy to plug, but they may also be loud. Do not blindly pursue large suction when choosing, but also pay attention to the size of the mouth.
For the mopping function, if your home is particularly prone to dirt, it is recommended not to choose sweeping robots. The presence of a mop not only compromises the fit of the sweeping robot to the ground, but it is very likely that the mop with water will get worse as the dirty area is cleaned. If the area you need to clean is dirty and you want to solve it with a sweeping robot, the best advice is to purchase a sweeping robot and a package for a mopping machine.
32v DC Power Supply is applicable to electrical equipment testing sector. The output current for 1U unit and 2U unit is up to 50A and 200A respectively.
It also covers 12v dc power supply, have the features including high precision and resolution,high efficiency low ripple ,complete multiple protection (OVP/OCP/OPP/OTP/SCP), Master/Slave Series/Parallel modes up to 10 units, and multiple communication interfaces,which allow a more flexible and convenient use of the programmable power supply.
Some features of the dc power supply as below:
- Ultrafast respond time
- Accurate voltage and current measurement capability
- Constant Power and wide range of voltage and current output
- Equips with LIST waveform editing function
- Compliant with SCPI communication protocol
- Built-in standard automobile electrical testing curves
- Support RS232/RS485/LAN/USB (standard) ,GPIB (optional)
- Voltage drop compensation by remote sense line.
- Have obtained CE,UL,CSA,FCC.ROHS
32V DC Power Supply,Adjustable DC Power Supply,Switching Power Supply,Computer Power Supply
APM Technologies Ltd , https://www.apmpowersupply.com