Molex , the world's leading provider of complete interconnect products, introduces a new line of through-hole Micro-LockTM single-row connectors for data/communications, telecommunications, networking equipment and consumer electronics, including gaming consoles Wire-to-board applications for LCD and PDP flat panel displays. Micro-Lock establishes a positive-lock 2.00 mm pitch connector with a low mating side height of 6.00 mm and a 'destruction-free' design feature to prevent damage to the connector pins during connector mating.
Goji Tanabe, regional product manager for Molex Micro Products, explains: "As flat-panel TVs and other electronic devices become thinner and denser, electronics are more densely packed, and mating of wire-to-board connectors may result in high insertion of terminals or pins. Damage caused by force. The new space-saving Micro-Lock connector system provides the industry's lowest insertion force for 2.00 mm pitch connectors and incorporates protection against pin damage to prevent connector pins from being angled. Bending or damaging."
The Micro-Lock connector system features a through-hole design with a current rating of 3.0A per pin and a 4 to 15 circuit type. The corrugated terminal and the round connector pins provide low insertion and removal forces. Key requirements for many electronic products. In addition, the corrugated terminal design ensures more reliable electrical performance and a smaller pin angle than the tuning fork and U-shaped terminal design.
The Micro-Lock connector features a guard wall and a detent feature that guides the cartridge into the connector and touches the pins when the housing is aligned for a safe, damage-free insertion. This two-point, established latch connector system features a wide mating latch that provides a secure mating retention and protects the connector pins from signal degradation or interference caused by pin damage.
Tanabe added: "The Micro-Lock connector is one of the lowest and lowest anchor latch-through connectors on the market and is ideal for OEMs who require robust performance and reliability."
Molex 's Micro-Lock connectors are manufactured from environmentally friendly, low-halogen materials. After the introduction of the through-hole design of the Micro-Lock connector series, the company plans to introduce other features including SMT, vertical and dual-row models later. Type
Resolver is a kind of commonly used angle detection component, because of its simple structure, reliable operation, and its accuracy can meet the general detection requirements
Resolver,Encoder Troubleshooting Resolver,Custom Resolver,Online Resolver
Yuheng Optics Co., Ltd.(Changchun) , https://www.yuhengcoder.com