Expulsion Fuse-Cut out 10kv

Model NO.: PRW-10KV
Type: Distribution
Shape: Circle
Fusing Device: Fuse Link
Trademark: OEIpower
Specification: IEC IEEE
HS Code: 85351000

Breaking Capacity: High
Usage: High Voltage
Fusing Speed: T K
Standard: IEC IEEE
Transport Package: Cartons Pallets Wooden Case
Origin: China Nanyang

TYPE "OEI" "PRW" STANDARD CUTOUT DISTRIBUTION TECHNICAL SPECIFICATION
The Fuse Cutout type DHE was developed to operate in overhead distribution systems rated at 12-15 kV and 15-27,kV or 27-38 kV grounded systems with 100 or 200 A nominal currents.
Especially designed to protect transformers, capacitors, cables or lines.
It is robust construction, made of rigorously tested material, will interrupt all faults under the
most severe conditions, maintaining mechanical and electric characteristics.
The inserts, hardware and structural bolts and nuts are made from heavy galvanized steel.
The Fuse Cutout type OEI PRW can be applied on all three-phase system rated at or below the maximum operational rating of the cutout. In highly polluted environments or environments with high levels of salinity, a cutout may be used with a higher nominal rating than
that of the system where it is being installed, where the insulator will have a greater leakage distance to ground, allowing for
increased safety against discharge. For an even better protection against abrasions, the hardware may be supplied in stainless
steel. The fuse cutout type MZ has attachment hooks in aluminum.
The Fuseholder has a stainless steel flipper, which associated with a spring doesn't allow the fuse link to be subject to traction
forces of over 3 Kgf, especially during closing. This me chanism also allows for high speed fuse link separation. The fuse cutout
type OEI PRW allows for the insertion of the fuse tube in a precise man ner and always in perfect alignment, due to the large distance
between the grunion pocket. Lower contact, silver-to-silver, provide du el current path, independent of hinge pivot. Stainless-steel
back-up springs prevent arcing when tube rises in hinge during recoil. The fuse cutout type OEI PRW may be transformed into a DI
CONNECT up to 300 A, by simply changing the fuse tube for an electrolytic copper blade.
The DHE Fuse Cutouts conform to ANSI and IEC standards, with independent tests performed At:
CPRI Always use quality fuse links. Only they can assure excellent performance.

Fuse assembly with rewirable fuse link:
rating available (type K or T) 1,2,3,5,10,15,20,25,30,
40,50,60,75 * 100A
? A spring loaded flipper and locking mechanism at the
lower end of the fuse carrier ensures consistent
tension on the fuse link and prevents element damage
during 'close in'
? Galvanised steel phase channel bases
? Connector terminals suitable for conductor sizes
ranging from 3mm to 12mm diameter
? Hook Stick operation
Â

Performance Characteristic
Applied standard	IEEE C37.42-2009
Catalog number	Â
Nominal system voltage kV	33
Rated Frequency Hz	50
Rated m aximum(design) voltage	38
Rated Continuous current A-RMS	100
Rated Interrupting current asymmetrical/symmetrical A-RMS	8000/5000
BIL 1.2x50 Âµs kV-peak	150
Minimum critical impulse flashover voltage(CFO)KV peak	165
Dry withstand voltage kV-RMS	70
Wet withstand voltage kV-RMS	60
Creepage distance to group Min.mm	650
Minimum creepage factor of insulator (Creepage Distance/arcing distance)	2.3

Elf Bar Vape

We sell 100% original ELFBAR vape. Elf bar disposable vapes sell very well, with good taste and beautiful appearance, and are recognized by consumers. The best-selling products, such as BC5000, BC4000, BC3000, Lost Mary 5000, and new product TE5000, are sold. TSVAPE is a Chinese supplier. If you are interested, please feel free to contact us.

Disposable Pod Wholesale Rechargeable Elf Bar BC5000

The ELF BAR Disaposable Vape Kit BC5000 comes in a library of flavors, each of which is a mixture of different fruit, menthol and drinks. Because of this impeccable variety of flavor combinations, there is a little something for everyone out there.

Specification:

650mAh Built-in Battery

Rechargeable

Efficient And Consistent Power Delivery

13ml Pre-filled E-juice

5% Nicotin Level

5000 Puffs

Features:

5000 Puffs per Disposable

E-Liquid Capacity: 13ml

650mAh Battery

Dual Mesh Coils