Square Round LED Flat Panel Emergency Light

Emergency LED Panel Light

Emergency Lighting LED Panels are a functional kit for helping the lamps to make shorter lighting time 
when meet special situations after whole power is off and offer people's convenience for actitities in daily life,
especially for life escape, which is done according to international enmergency lighting time& quality standards.

Luxsky lighting focuses on the lighting solutions and products for our clients in many kinds of high quality
lighting projects. Here, you canget our products, technology and good service support.Welcome to enquiry our
LED emergency lighting Panel lights.

Specification:

Features:

LED high lumen output, view-side light;

Warm white, natural white, cool white and other colors can be available;

Color temperature 2800K-3300K, 4000-4500K,5000-5500K, 6000K-6500K;

Input voltage: AC100-240V, constant current;

Dimensions: 5'', 6'', 8'', 595*595mm,600*600mm, 620*620mm, 300*1200mm, 600*1200mm;

Luminous efficacy >100lm/W;

CRI. 80-85Ra;

Working temperature:-15ºC~55ºC;

Beam angle: 120°;

Lifetime: more than 50,000Hours;

Install method: suspended/ceiling mounted/recessed;

Materials: High lumen and quality Epistar 2835 SMD LEDs(22-26lms), 6063 aluminum housing profiles(silver/white);

Adopt own design structure and nice heat sink to keep panel structure steady and high quality;

High-efficiency, low-heat and energy-saving, eco-friendly, long lifetime, UV-resistant,dustproof;

With TUV CE, RoHs approval,TUV/UL driver, 3 years' warranty;

With LED emergency lighting time 1 hour to 3 hours available.

Emergency Lighting Driver Introduction:

Match with DC12V battery (ni-M H), (ni-C d) , which can be high temperature resistant and can be charged.

The device can meet the requirement of 10-100 watts full power LED panel to realize the emergency function;

When emergency lighting is started, the brightness can be 30% -50% of the normal lighting.

It meets international emergency standard, 30% emergency lighting, three-color indicat or lights.

When AC power is working, the inverter makes the battery in the situation of charging or preparing

 to work; Once earthquak es, fire disasters or explosions happen, the AC power is off, so the inverter

 will start the emergency batteries to offer power to lights.

When the battery finishes charging, it will keep the power , compensate the battery' s discharging 

 and maintain the performance and lifetime of battery.

It can meet 1-5 hour s emergency lighting after match the fitful batteries.

Environment temperature : -20 to 60ºC .

Connect the driver and panel strictly by seeing the connected drawing, do not

 advise to take off the cover .

Customer could check the inverter 's power stock per iodically.

Parameters(take 40W emergency panel as sample):

1>. AC 100-240V input , 50/ 60Hz;

2>. DC20-70V Out put;

3>. For LED power : 10-100W

4>. Em ergency time: 3 hrs ( can be custom if possible)

5>. Batter: Dc12V;

6>. Charge current: 100-200m A;

7>. Charge time: 30-45Hrs by slowing charge way;

8>. Max. Size: 440* 75* 75mm.
 

Emergency Driver Connect Drawing & Attention:

 

Maintenance:

Emergency ma chine chip is the core component for controlling the battery charging and starting the emergency

lighting, so when connect the wires and should keep it connected correctly. After installation and work,

it will release the power from battery each three mo nths, which can protect the battery and extend its lifetime .

After they are used norma lly, they should be often checked and ma intained by professional workers, once

they find they work unusually or need to inspect, please inform luxsky lighting.

 

Emergency LED Panel Light

Emergency Lighting LED Panels are a functional kit for helping the lamps to make shorter lighting time 
when meet special situations after whole power is off and offer people's convenience for actitities in daily life,
especially for life escape, which is done according to international enmergency lighting time& quality standards.

Luxsky lighting focuses on the lighting solutions and products for our clients in many kinds of high quality
lighting projects. Here, you canget our products, technology and good service support.Welcome to enquiry our
LED emergency lighting Panel lights.

Specification:

Features:

LED high lumen output, view-side light;

Warm white, natural white, cool white and other colors can be available;

Color temperature 2800K-3300K, 4000-4500K,5000-5500K, 6000K-6500K;

Input voltage: AC100-240V, constant current;

Dimensions: 5'', 6'', 8'', 595*595mm,600*600mm, 620*620mm, 300*1200mm, 600*1200mm;

Luminous efficacy >100lm/W;

CRI. 80-85Ra;

Working temperature:-15ºC~55ºC;

Beam angle: 120°;

Lifetime: more than 50,000Hours;

Install method: suspended/ceiling mounted/recessed;

Materials: High lumen and quality Epistar 2835 SMD LEDs(22-26lms), 6063 aluminum housing profiles(silver/white);

Adopt own design structure and nice heat sink to keep panel structure steady and high quality;

High-efficiency, low-heat and energy-saving, eco-friendly, long lifetime, UV-resistant,dustproof;

With TUV CE, RoHs approval,TUV/UL driver, 3 years' warranty;

With LED emergency lighting time 1 hour to 3 hours available.

Emergency Lighting Driver Introduction:

Match with DC12V battery (ni-M H), (ni-C d) , which can be high temperature resistant and can be charged.

The device can meet the requirement of 10-100 watts full power LED panel to realize the emergency function;

When emergency lighting is started, the brightness can be 30% -50% of the normal lighting.

It meets international emergency standard, 30% emergency lighting, three-color indicat or lights.

When AC power is working, the inverter makes the battery in the situation of charging or preparing

 to work; Once earthquak es, fire disasters or explosions happen, the AC power is off, so the inverter

 will start the emergency batteries to offer power to lights.

When the battery finishes charging, it will keep the power , compensate the battery' s discharging 

 and maintain the performance and lifetime of battery.

It can meet 1-5 hour s emergency lighting after match the fitful batteries.

Environment temperature : -20 to 60ºC .

Connect the driver and panel strictly by seeing the connected drawing, do not

 advise to take off the cover .

Customer could check the inverter 's power stock per iodically.

Parameters(take 40W emergency panel as sample):

1>. AC 100-240V input , 50/ 60Hz;

2>. DC20-70V Out put;

3>. For LED power : 10-100W

4>. Em ergency time: 3 hrs ( can be custom if possible)

5>. Batter: Dc12V;

6>. Charge current: 100-200m A;

7>. Charge time: 30-45Hrs by slowing charge way;

8>. Max. Size: 440* 75* 75mm.
 

Emergency Driver Connect Drawing & Attention:

 

Maintenance:

Emergency ma chine chip is the core component for controlling the battery charging and starting the emergency

lighting, so when connect the wires and should keep it connected correctly. After installation and work,

it will release the power from battery each three mo nths, which can protect the battery and extend its lifetime .

After they are used norma lly, they should be often checked and ma intained by professional workers, once

they find they work unusually or need to inspect, please inform luxsky lighting.

 

CL-2H Copper Connecting Terminals

Our company specializes in the production and sales of all kinds of terminals, copper terminals, nose wire ears, cold pressed terminals, copper joints, but also according to customer requirements for customization and production, our raw materials are produced and sold by ourselves, we have their own raw materials processing plant, high purity T2 copper, quality and quantity, come to me to order it!

CL-2H Copper Connecting Terminals

Taixing Longyi Terminals Co.,Ltd. , https://www.longyicopperterminals.com