As the world's leading supplier of high-performance silicon solutions, ON Semiconductor is committed to providing system-wide technologies and solutions for the white goods sector, providing power and signal management, logic, discrete and custom devices to help white goods customers. Overcome the design challenges faced in power management, motor drive, system control, user interface, communication interconnect and other functional modules.
Figure 1. Simplified block diagram of the whiteware function module
Power management function module
ON Semiconductor is actively involved in the development and updating of various specifications and incentive programs (such as ENERGY and 80 PLUS) in various energy standards and standards, and introduces solutions and products that comply with all relevant regulations around the world. ON Semiconductor offers a broad lineup of power management solutions to help customers meet the challenges of power management critical areas such as low standby power consumption, high energy efficiency, and power factor correction. Its GreenPoint reference design specifies the direction in which the energy-efficient power supply is designed. The schematics, bill of materials (BOM), PCB Gerber files, design priorities, and test reports included in the reference design help engineers shorten design cycles and speed time-to-market.
ON Semiconductor's solutions for white goods power management function modules include AC-DC conversion, DC-DC conversion, power factor correction (PFC) and power supply inverter. ON Semiconductor's high-performance AC-DC off-line regulators integrate high-voltage power MOSFETs to simplify the design of low-power switching power supplies. The NCP107x (0/1/2/5/6/7) series is available in PDIP-7 or SOT-223 packages and integrates a 700 V high-voltage MOSFET with current mode 65/100/130kHz fixed frequency for 3W to 15W. Power application. This series supports frequency anti-going and skip-cycle modes, which can effectively improve the light load energy efficiency of the power supply. In addition, the series also features a built-in high voltage start-up function that supports Dynamic Self-Powered (DSS) and provides a lossless start-up sequence.
Figure 2 shows an 8W dual output mains supply flyback power supply based on ON Semiconductor's NCP1075 with a fixed operating frequency of 100kHz; both outputs contain Schottky diodes for improved energy efficiency; Sensing selection; the transformer secondary winding provides good load regulation and mutual regulation.
Figure 2. 8W dual output mains supply flyback power supply based on ON Semiconductor NCP1075
The NCP112x (2/4/9) series is available in a PDIP-7 package with a built-in 650 V rated avalanche energy MOSFET and operates in peak current mode 65/100kHz switching frequency. The NCP112x supports frequency jitter under normal and frequency reversal conditions to improve electromagnetic interference (EMI) performance. It has a built-in 4 ms soft start, adjustable current limit and effective reduction of no-load standby energy.
Figure 3 shows a 25 W high-voltage mains supply based on ON Semiconductor's NCP1129, which provides a 12 V constant voltage output with peak current mode control and adjustable slope compensation to ensure stability in continuous conduction mode (CCM); Optimize short-circuit protection and actual overload detection; the frequency reverses to 26kHz under light load conditions.
Figure 3. 25W high voltage mains power supply based on ON Semiconductor NCP1129 design
At the same time, ON Semiconductor also provides customers with a complete range of power semiconductor products such as highly integrated power factor controllers, DC-DC controllers, discrete MOSFETs, power rectifiers, diodes and transistors.
Motor drive function
ON Semiconductor offers discrete and modular designs for white goods variable frequency drives:
Discrete design devices: ON Semiconductor's MOSFET/IGBT gate drivers NCP5104, NCP5106, NCP5111, NCP5181 can operate at input voltages up to 600V, have dv/dt immunity of 50V per nanosecond, and are compatible with 3.3V and With 5V input logic, these devices use bootstrap technology to ensure driving high-side power switches and provide a rugged design.
ON Semiconductor's IGBT products for power factor controllers include NGTB05N60, NGTB10N60, NGTB15N60, NGTB20N60L2, NGTB30N60 with freewheeling diodes; IGBT products for motor driven passive power factor correction are NGTG12N60, NGTG15N60S1, NGTG20N60L2, NGTG30N60F, NGTG50N60F, Without freewheeling diodes.
Figure 4. IGBT for power factor controller 
Figure 5. IGBT for motor drive power factor correction
ON Semiconductor's motor-controlled MOSFETs feature low on-resistance, low capacitance, low gate charge, minimize device turn-on losses, switching losses, and driver losses, providing high avalanche resistance and high current Passing ability.
Modular design: ON Semiconductor uses IMST (Insulated Metal Substrate Technology) technology to package discrete passive devices (resistors, capacitors), discrete active devices (diodes, transistors) and integrated circuits (gate drivers, DSP, logic) In the same intelligent power module (IPM).
Figure 6. Diagram of ON Semiconductor's proprietary Insulated Metal Substrate Technology (IMST)
The Intelligent Power Module (IPM) includes gate drive, undervoltage protection (UVLO), overtemperature detection, and current sensing. It can be integrated with PFC through internal optimized wiring to improve EMI and heat dissipation.
ON Semiconductor's stepper motor drivers for white motor motor motion control provide high-precision microstepping for smooth, quiet operation. AMIS-30622 integrated sensorless stall detection, can dynamically control speed, torque and position to maintain continuous operation; LB1948MC and LV8548MC can provide bipolar and BiDCMOS options, support single-channel stepper motor / dual-channel DC motor, excitation mode support Full step, half step, low saturation voltage, low on-resistance, etc.; LV8712T adopts single channel PWM constant current control, excitation mode includes full step, half step, 1/4 step, 1/8 step, integrated overheat shutdown, Low voltage detection and protection such as active flyback.
ON Semiconductor offers single-phase and three-phase motor drivers for brushless DC motor (BLDC) drives. The LB11685AV features sensorless design, pulse amplitude modulation (PAM) control, soft start for improved start-up stability, and soft switching. It helps to provide silent drive, built-in current limiter, over temperature shutdown and beat lock protection; LV8136V is a three-phase BLDC motor PWM system pre-driver IC, providing energy-efficient, 150° PWM silent drive.
I-Beam Inductors,Chip Inductors,Color Ring Inductor,R-Bar Inductors
Shenzhen Sichuangge Magneto-electric Co. , Ltd , https://www.rodinductor.com