Before the power supply of the variable frequency power supply, check the temperature and humidity of the surrounding environment. If the temperature is too high, the inverter will overheat the alarm. Seriously, the power supply of the inverter power supply will be damaged and the circuit will be short-circuited. If the air is too humid, the internal short-circuit of the inverter power supply will be caused.
When the variable frequency power supply is running, pay attention to whether the cooling system is normal, such as: whether the air duct exhaust is smooth, and whether the fan has abnormal sound. Generally, the variable frequency power supply with higher protection level, such as: IP20 or above, can be directly installed. The variable frequency power supply below IP20 should be cabinet installed. Therefore, how the heat dissipation effect of the inverter cabinet will directly affect the normal operation of the variable frequency power supply. Exhaust system, such as whether the fan rotates smoothly, whether there is dust and blockage in the air inlet is a place that we can not ignore in daily inspection.
Whether the motor reactor, variable frequency power supply, etc. are overheated, have odor; whether the variable frequency power supply and the motor have abnormal noise; whether the current display of the variable frequency power supply panel is too large or the current change range is too large, and whether the output voltage and current of the UVW are balanced.
A separate slip ring is a device that allows two or more rotating electrical shafts to be connected without having to pass the electricity through the shafts' bearings. This is often used in situations where there is a need to power something externally while the shaft is still turning. For example, a machine might have a drive shaft that powers it while also having a separate output shaft that needs to turn at a different speed. By using a separate slip ring, these two shafts can be powered without any interference.
Slip Ring Shaf is a key component of a slip ring. It is the shaft on which the rotary electrical contacts are mounted. The shafts must be strong enough to support the weight of the contacts and must be able to turn freely. There are many factors to consider when selecting a shaft material, including strength, corrosion resistance, and operating temperature.
Oubaibo is a professional separate slip ring manufacturer located in China. They offer a wide range of slip ring shaft made from different materials, including carbon steel, stainless steel, and brass. Their products are made to meet the highest quality standards and are backed by a 100% satisfaction guarantee.
Separate Slip Ring,Slip Ring Shaft,Slip Ring 4 Wire,Slip Ring For Motor
Dongguan Oubaibo Technology Co., Ltd. , https://www.sliprobs.com