LED electronic display installation hardware steps:
1. Insert the DVI display card into the motherboard AGP socket, and then set the driver.
2. Insert the data card into the PDI jack on the motherboard (this is for users with data cards);
3. Link the two controls DVI and AGP installed above together;
4. Connect the control line to the serial port Rs232;
5. Connect the network cable to the receiving card; the specific number is based on the engineering drawings;
6. Check that the connection is correct and you can set it up or power up.
Full color LED display software device installation method:
1, graphics card driver installation
Insert the video card driver CD into the CD-ROM drive, you can automatically enter the device state, please follow the prompts;
First install DirectX 8.1 and then install the driver; finally device control panel.
2, play software
Device large screen dedicated playback and setup software LED studio, or other control software;
Insert the application CD that came with the screen into the CD-ROM drive, copy or install all the order to the computer.
3. After the debugging is completed, the LED electronic display is successfully installed!
Other notes:
Check whether the wiring method is correct, including the connection of the strong electric part (the weak part has been tested in the production enterprise), and whether the signal connection is correct, mainly whether the input and output direction of the system receiving card is correct, and the receiving card has a direction indication.
The system is connected correctly (please read the system connection instructions).
Whether the computer software part is installed, including the settings of the graphics card (please read the video card setting instructions) and control software installation.
Precautions:
1. Observe the operating procedures in the User Manual.
2, moisture-proof, humidity requirements: at the highest working temperature, the LED display should be less than the relative humidity of 92%;
3, the temperature is appropriate, the temperature requirements are: working environment temperature -20 ° C ≤ t ≤ 80 ° C, storage environment temperature -40 ° C ≤ t ≤ 60 ° C;
4, the power supply must meet the requirements
The power supply voltage of the LED display: 220V ± 10% frequency: 50HZ ± 5%.
The safety ground contact is reliable, the ground wire and the neutral wire are isolated reliably, and the power source is connected away from the high-power electrical equipment.
Bitcoin mining is the process of creating new bitcoin by solving puzzles. It consists of computing systems equipped with specialized chips competing to solve mathematical puzzles. The first bitcoin miner (as these systems are called) to solve the puzzle is rewarded with bitcoin. The mining process also confirms transactions on the cryptocurrency's network and makes them trustworthy.
For a short time after Bitcoin was launched, it was mined on desktop computers with regular central processing units (CPUs). But the process was extremely slow. Now the cryptocurrency is generated using large mining pools spread across many geographies. Bitcoin miners aggregate mining systems that consume massive amounts of electricity to mine the cryptocurrency.In regions where electricity is generated using fossil fuels, bitcoin mining is considered detrimental to the environment. As a result, many bitcoin miners have moved operations to places with renewable sources of energy to reduce Bitcoin's impact on climate change.
Btc Miner,Bitmain S19 Xp,Bitmain Antminer S19 Xp,Antminer Bitmain S19 Xp 140Th
Shenzhen YLHM Technology Co., Ltd. , https://www.apgelectrical.com