Why eliminate incandescent lamps The country vigorously promotes energy-saving lamps. What are the advantages of energy-saving lamps compared to incandescent lamps? Compared with traditional lighting, energy-saving lamps have incomparable advantages, almost integrates the advantages of various traditional light sources, and are applicable to various traditional light sources. Low calorific power, low power consumption (1/8 of incandescent light, 1/2 of fluorescent light), long life (up to tens of thousands of hours, 3 to 10 times higher than conventional lamps), good color development, fast response , no flash frequency, no eye damage, small size, flat package, thin and light products and other advantages. China is a big country in the production and consumption of lighting products. The output of energy-saving lamps and incandescent lamps ranks first in the world.
Everything has a two-sided nature. When the policy was introduced, some people questioned whether 4 watts must be more energy-efficient than 60 watts. Maybe simply replaced with a 4 watt energy-saving lamp, the effect is not necessarily better than the 60-watt incandescent.
According to calculations, China's lighting electricity consumption accounts for about 12% of the total electricity consumption in society. If high-efficiency lighting products are used instead of incandescent lamps, the potential for energy saving and emission reduction is huge. In the home unit, a 60-watt incandescent light bulb produces lighting that can roughly satisfy the family's life, and an 11-watt energy-saving light can satisfy the same lighting, but if it is replaced with a higher-tech LED, it only needs 3.5 watts. Up to 4 watts. One is 4 watts and one is 60 watts. If you replace all incandescent lamps with LEDs, you may only pay 1/15 of the electricity bill. LED light bulbs are still relatively expensive, but their longevity is also very long. They can be used for tens of thousands of hours. In the long course of tens of thousands of hours, a light bulb may save the same amount of coal as a hill.
According to experts, Xu Yongsheng, director of the National Energy Administration’s Electric Power Department, said that “the elimination of backward production capacity will promote the nation’s energy-saving and emission reductionâ€, saying: “The standard of backward production capacity is a dynamic standard, and it may follow the development of the economy and with the technical level of the industry. The standards for backward production capacity will also be adjusted, but strictly speaking, this standard is more in line with the laws, regulations, and related policies that we have emphasized such as environmental protection, energy conservation, safety, and quality."
According to Xie Ji, deputy director of the Department of Circumstances Division of the National Development and Reform Commission, “China is a major producer and consumer of lighting products. The output of energy-saving lamps and incandescent lamps ranks first in the world. In 2010, the output of incandescent lamps and domestic sales were respectively 3.85 billion and 1.07 billion. The government will strongly encourage the production and promotion of LED lamps, and the National Development and Reform Commission is organizing the drafting of the "12th Five-Year Plan" for the semiconductor lighting industry, and the Ministry of Finance will study and formulate measures to encourage LED promotion in light of the green lighting policy. The output value will be quadrupled."
Xie Zhenhua, deputy director of the National Development and Reform Commission, said: "Lighting energy conservation is an important part of countries around the world in promoting energy conservation and emission reduction and responding to climate change. China is a major producer of lighting products and supplies more than 30% incandescent and 85% energy-saving lamps to the global product market. The phase-out of incandescent lamps will make an important contribution to saving energy and reducing greenhouse gas emissions globally."
Fang Qing, deputy director of the China Energy Conservation Association, said that in recent years, the proportion of energy-saving lamps in China's resident consumer lighting has reached 30% to 50% through publicity and publicity; in government agencies and large public facilities, the proportion has reached 80% ~ 90%, it is expected that by 2015, China will completely eliminate incandescent lamps.
Studies have shown that most incandescent lamps convert 90% of the energy consumed into useless heat, and less than 10% of the energy becomes light. This is very power-consuming. As for the lighting time, the life time of such lights usually does not exceed 1000 hours. To reduce greenhouse gas emissions, the use of incandescent light bulbs will be banned from 2010.
Lighting power in China accounts for about 13% of total electricity consumption in the society. If we replace all the 1.4 billion incandescent lamps in use in China with energy-saving lamps, we can save 48 billion kilowatt-hours of electricity annually, which is equivalent to reducing carbon dioxide emissions by 48 million tons every year. Therefore, reducing and phase-out incandescent lamps is an important issue for energy conservation and emission reduction. Initiatives.
The interpretation of policies and experts is undoubtedly injecting sufficient vitality into the development of the entire LED industry. However, in the eyes of industry experts, there is no small crisis in this boom. “The standard issue is the biggest obstacle to the development of the LED industry at present, especially the lack of standard and standardized standardized optical components and lighting standards. Guangdong Provincial Science and Technology Department once took the lead in promoting LED lighting products in the country,†said Dr. Ruan Shirong of the Guangdong Semiconductor Lighting Industry Co-Innovation Center. Quality benchmarking system and clearly stipulates that the LED demonstration project must use products that have been benchmarked and recommended by the benchmarking system.In August last year, the Provincial Department of Science and Technology took the lead in organizing 21 research institutes and leading companies to jointly establish the Guangdong Provincial Semiconductor Industry Lighting Industry Joint Innovation Center. The center is a link that organizes upstream and downstream industrial chain or complementary technology companies, related universities and research institutes, etc., to jointly overcome a number of core LED key technologies.The current implementation of the LED lighting standard optical component project is the first organization initiated by the Guangdong Province in the country. The major LED lighting industry research projects."
A 24V Dc Motor Consistency is good, reliable performance, low malfunction, torque, motor no-load and load running more smoothly and the lowest in 50 decibels
Functions: 24V dc motor rotor part of the armature iron core, armature, commutator and other devices, 24V dc motor is suitable for most of the electronic products, such as Electric curtains, car, sweeping robot, no hakaze fan, etc
Areas of application:
Method of use: the best stable in horizontal plane, installed on the 24V dc motor output shaft parts, cannot use a hammer to knock, knock prone to press into the 24V dc motor drive, may cause damage to internal components, and cannot be used in the case of blocked.
Operating temperature range:
24V dc motor should be used at a temperature of -10~60℃.
The figures stated in the catalog specifications are based on use at ordinary room temperature catalog specifications re based on use at ordinary room temperature (approximately20~25℃.
If a 24V dc motor is used outside the prescribed temperature range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.Depending on the temperature conditions ,it may be possible to deal with them by changing the grease of the motor's parts.Please feel free to consult with us about this.
Storage temperature range:
24V dc motor should be stored ta a temperature of -15~65℃.
In case of storage outside this range,the grease on the gearhead area will become unable to function normally and the motor will become unable to start.
Service life:
The longevity of geared motors is greatly affected by the load conditions , the mode of operation,the environment of use ,etc.Therefore,it is necessary to check the conditions under which the product will actually be used .The following conditions will have a negative effect on longevity.Please consult with us should any of them apply.
â—Use with a load that exceeds the rated torque
â—Frequent starting
â—Momentary reversals of turning direction
â—Impact loads
â—Long-term continuous operation
â—Forced turning using the output shaft
â—Use in which the permitted overhang load or the permitted thrust load is exceeded
â—A pulse drive ,e.g.,a short break,counter electromotive force,PWM control
â—Use of a voltage that is nonstandard as regards the rated voltage
â—Use outside the prescribed temperature or relative-humidity range,or in a special environment.
â—Please consult with us about these or any other conditions of use that may apply,so that we can be sure that you select the most appropriate model.
when it come to volume production,we're a major player as well .each month,we rurn out 600000 units,all of which are compliant with the rohs directive.Have any questions or special needed, please contact us, we have the engineer group and best sales department to service to you Looking forward to your inquiry. Welcome to our factory.
24V Dc Motor,24V Dc Micro Motor,24V Dc Electrical Motor,24V Micro Dc Motor
Shenzhen Shunchang Motor Co., LTD. , https://www.scgearmotor.com