The global lighting market can be divided into three categories: general lighting, automotive lighting and display. General lighting includes office lighting, home lighting, rail transit lighting, etc., with a market share of up to 80%.
As the most promising light source, LED has many advantages such as energy saving, environmental protection and long service life. With the phasing out of incandescent lamps, countries have introduced a timetable for disabling incandescent lamps. As early as 2012, the European Union, Japan, and Canada had completely banned the use of incandescent lamps. Since 2014, the United States has banned the sale of 40W, 60W, 75W and 100W incandescent bulbs. At the same time, China also prohibits the import and sale of incandescent lamps of 60W and above, which will vigorously promote the sustainable development of China's LED lighting market, and the market penetration rate is expected to further increase.
At present, China's LED lighting applications are still in the initial penetration stage, mainly including general lighting, LED displays, traffic lights, car lights and LCD backlights. From the perspective of the LED industry chain, it can be mainly divided into upstream raw materials and chips; midstream LED packaging; downstream LED applications. Among them, the core technology of LED upstream chip and epitaxial wafer market is monopolized by foreign giants. Compared with the chip industry, China's midstream LED packaging industry is the most competitive, and the package varieties are more comprehensive. At present, China's LED packaging has formed a certain industrial scale, becoming an important low-end LED packaging production base in the world. At the same time, with the continuous improvement of process technology and the rapid increase in the market share of high-end packaging, the competitiveness of LED packaging companies will continue to increase in the future.
Last year, China's LED lighting penetration rate reached about 30%, slightly higher than the global level, there is still room for development in the future. Last year, China's LED packaging market was 8.8 billion US dollars, an increase of 2%. This year, the demand for lighting manufacturers to replenish stocks has increased. It is expected that the scale of China's LED packaging market will reach 9.3 billion US dollars in 2016, and the growth is expected to exceed 5%. With the improvement of LED technology and the increasing market demand, the LED industry will usher in a period of rapid development.
Related companies: Philips, Osram, Seoul Semiconductor, Samsung Electronics, Sanan Optoelectronics, Jingneng Optoelectronics, Mulinsen, Manjiamei, Longda Electronics, Tiandian Optoelectronics, Ruifeng Optoelectronics, Hongli Optoelectronics, Silicon Energy Lighting, Yuliang Optoelectronics, Zhaoma Electronics, Zhaoguan Lighting, Zhongzhi Optoelectronics, Yimeixinguang, Op Lighting, Sunlight Lighting, etc.
Antenk extended its connector product range by SD card connectors. As already mentioned there are various applications, in the past driven by the computer industry, which are using memory cards as well in their end products, single sided pressure contact connectors can be designed and manufactured according to a customer specific requirement based on customer dedicated insulator- and contact dies. Such single sided pressure contact connectors are mainly used as board to board connection on the base of direct contact to the pads on the board.
Compact Flash Card Connector Overview
Store More Memories
Compact Flash storage cards are small, removable, mass-storage devices. They electrically comply with Compact Flash Association standards, the PC Card ATA standard, and run in True IDE mode. These 50-position cards typically hold between 32 MB and 2 GB of memory and are about the size of a matchbook. Antenk`s connectors include headers that can accept Type I (3.3mm thick) or Type II (5.0mm thick) storage cards, flush and raised mounting heights, and ejectors. Antenk Compact Flash card connectors also provide electrostatic discharge protection.Adapter for Compact Flash Card type I and II
Available with various ejectors
Different stand offs heights
Reverse type without stand-off height is not applicable to Compact Flash Card Type II
Compact Flash Card Connector Specification
Insulation Resistance: 1000MΩ at 500V DC
Withstanding Voltage: 500Vrms
Current Rating: 1A AC/DC max.
Contact Resistance: 40mΩ max. at 20mV max.
Operating Temp. Range: -55°C to +85°C
Reflow Solder Temp.: 220°C min. / 60 sec, 260°C peak
Mating Cycles: 10,000 times
Materials and Finish
Insulator: LCP, glass filled (UL94V-0)
Push Button: Glass reinforced PBT (UL94V-0)
SMT Metal: Brass, pure Sn
Pivot Shell: Stainless Steal
Contacts: Brass
Plating: Contacts - Gold (15µ[) over Nickel (40µ[), Solder Tails - pure Sn
Compact Flash Card Connector Product Features
Compact Flash Connectors
Robust surface-mountable designs
Proven PCMCIA contact technology
Accepts hardware for mechanical mounting
Top- and bottom-mounting styles
Right-angle and vertical orientations
Compact Flash Connectors Applications
Desktop and laptop computers
Digital cameras
Smart phones
Data recorders
Slot machines
Industrial and embedded computers
SD Card Connector,Tf Card Connector,Sd Card Connectors,Natural Cf Card Connector,Compact Flash Card Connector,CF cards types I/II,CF Card connector MA type Adapter,CF Card connector MA type Ejector
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkcon.com